NEWGPU owners: host free demos on your card and earn a bigger share of every paid job. See how →

Describe the part. Print the file.

Tell your assistant what you need in plain words and millimetres. It designs the part, checks that the measurements came out right, shows it to you from every side, and gives you a file your slicer opens.

Connect your assistant About the 3D studio

https://pilot.legit2compute.com/mcp
One sentence in, a printable bracket out, then resized for a bigger pipe. Every picture came out of the studio.

Made from dimensions, not from a picture

Tools that turn a prompt into a 3D shape are good at figurines and bad at parts: the result looks right and fits nothing. A bracket has to fit the pipe.

The studio works the other way round. Your assistant writes the part as a small program with your dimensions in it, the studio builds it, and the answer comes back with the real measurements. A 25 mm pipe gets a 25 mm bore, and if it does not, the assistant sees that and fixes it before you spend filament.

What people make

  • Brackets, mounts and clips for a pipe, a rail, a shelf or a cable.
  • Enclosures and lids sized to a circuit board, with holes where the connectors are.
  • Adapters and spacers between two sizes that were never meant to meet.
  • Threaded parts: knobs, caps and nuts with real threads.
  • Organisers: Gridfinity bins and baseplates in any size, with the compartments you want.
  • Replacement parts measured with a caliper and described in a sentence.

How it goes

  1. Connect the studio to your assistantOne address, added as a connector, allowed from your account. How to connect
  2. Describe the partThe more numbers the better: sizes, hole diameters, wall thickness.
  3. Look at itYou get pictures from four sides and the measured size and volume. Ask for changes in words.
  4. Print itTake the .3mf or .stl into your slicer. Want a picture for a listing or a manual? Ask for a render.

Things to ask for

Open the 3D studio. I need a cable clip for a 6 mm cable that screws to a wall with one M3 screw. Keep it under 20 mm wide.
Make a box for a 70 by 50 mm circuit board with 4 mm of clearance, 2 mm walls, a lid that presses on, and a 12 by 7 mm opening on one short side.

What it costs

Studio time, parts, draft pictures, vector art and exports are not charged. The first 5 finished renders on an account are free. After that a render is paid from your credit balance when it starts, and refunded if it fails.

Finished renderDraftGoodBest
Still, up to 1080p$0.01$0.03$0.06
Still, 4K$0.04$0.12$0.24
Video, per frame at 720p$0.005$0.01$0.02
Video, per frame at 1080p$0.011$0.023$0.045

A 3-second draft turntable at 24 frames a second is 72 frames: $0.36. Add credits on your account page.

Questions

Do I need to know CAD?

No. You describe the part and look at the pictures. Knowing your measurements matters more than knowing any software.

Which file do I get?

An .stl and a .3mf of every part. Both open in the common slicers.

Will the part fit?

The studio reports the size it actually built, so the dimensions you asked for are the dimensions you get. Printers differ, so for a tight fit ask for a little clearance, usually 0.2 to 0.4 mm, as you would in any design.

Can I change it later?

Yes. Parts are kept by name, and a save point keeps your studio's files for 7 days. "Make the holes 5 mm" rebuilds the part in seconds.

Which assistants can use it?

Any assistant that can add a remote connector (the MCP standard) with sign-in. ChatGPT, Claude and Codex support that standard. You add one address and allow the connection from your legit2compute account.

Can the studio reach the internet or my computer?

No. A studio has no network connection at all, and it runs on our side, not on your computer. It works only on what your assistant writes or uploads into it, and hands files back through the chat.

What does it cost?

Studio time, parts, draft pictures, vector art and exports are not charged. The first 5 finished renders on an account are free. After that a render is paid from your credit balance when it starts, and refunded if it fails. A still up to 1080p is $0.01 at draft quality, $0.03 at good and $0.06 at best; a 4K still is four times that. Video is $0.005, $0.01 or $0.02 per frame at 720p, and 2.25 times that at 1080p.

Give your assistant a workshop

One connector address. Nothing to install.

Connect your assistant

More about the 3D studio

Updated 2026-11-22.