NEWGPU owners: host free demos on your card and earn a bigger share of every paid job. See how →

OpenSCAD for your AI assistant, with the libraries installed

Your assistant writes the part as OpenSCAD code, the studio builds it in seconds and reports the exact measurements, and you get an .stl and a .3mf for your slicer. Change a dimension by saying so.

Connect your assistant About the 3D studio

https://pilot.legit2compute.com/mcp
A pipe bracket from one sentence: built, shown from four sides, resized for a bigger pipe, rendered. Every picture came out of the studio.

Why OpenSCAD suits an assistant

An OpenSCAD part is a short program with real dimensions in it. That is the kind of thing an assistant is good at writing, and the kind of thing that can be checked: the studio builds the part and answers with its size in millimetres, its volume and a picture, so the assistant can see that the hole really is 4.3 mm and the plate really is 3 mm thick before you print anything.

What usually gets in the way is the setup: an OpenSCAD new enough to be fast, the libraries everyone uses, and a way for the assistant to run it. The studio has all three.

What is installed

  • A current OpenSCAD with the fast geometry engine. A plate with four holes, engraved text and a thread built in 2.4 seconds in our tests; a Gridfinity bin in 1.4 seconds.
  • BOSL2 for rounded and chamfered shapes, attachments, gears and much more.
  • Thread and hardware libraries: screw threads, and real screws, nuts and other hardware to design around.
  • Round-Anything for filleted outlines, MCAD for gears and bearings.
  • Gridfinity bins and baseplates.

What comes back

  • An .stl and a .3mf, ready for a slicer.
  • Measurements: width, depth and height in millimetres, where the part sits, and its volume.
  • Pictures from a corner, or from the corner, front, side and top together.
  • OpenSCAD's own warnings and errors, so the assistant fixes its code instead of guessing.
  • A part you can change: it is kept under its name, so "make it 10 mm wider" rebuilds it with the new value.

Things to ask for

Open the 3D studio and make a wall bracket for a 25 mm pipe: two M4 countersunk screw holes, 3 mm thick. Show it from every side and give me the .3mf.
Make a Gridfinity bin, 3 by 2 units and 6 units tall, with six compartments.
I need a knob with an M8 internal thread, 30 mm across, knurled. Use the thread library.

What it costs

Studio time, parts, draft pictures, vector art and exports are not charged. The first 5 finished renders on an account are free. After that a render is paid from your credit balance when it starts, and refunded if it fails.

Finished renderDraftGoodBest
Still, up to 1080p$0.01$0.03$0.06
Still, 4K$0.04$0.12$0.24
Video, per frame at 720p$0.005$0.01$0.02
Video, per frame at 1080p$0.011$0.023$0.045

A 3-second draft turntable at 24 frames a second is 72 frames: $0.36. Add credits on your account page.

Questions

Which assistants can use it?

Any assistant that can add a remote connector (the MCP standard) with sign-in. ChatGPT, Claude and Codex support that standard. You add one address and allow the connection from your legit2compute account.

Do I need OpenSCAD installed?

No. OpenSCAD and the libraries run in the studio. You only need the slicer you already print with.

Can I get the OpenSCAD source too?

Yes. Ask your assistant for the code it wrote; it is ordinary OpenSCAD and opens in OpenSCAD on your own computer. The libraries it uses are open source.

How big or complicated can a part be?

Most parts build in a few seconds. Very heavy geometry, such as rounding a detailed shape at very high resolution, can run out of the studio's memory; the assistant is told so and lowers the detail.

Can it make flat parts for a laser cutter?

Not as a part yet: the studio exports solids. Flat artwork can be drawn as SVG and delivered as PDF and PNG.

Can the studio reach the internet or my computer?

No. A studio has no network connection at all, and it runs on our side, not on your computer. It works only on what your assistant writes or uploads into it, and hands files back through the chat.

What does it cost?

Studio time, parts, draft pictures, vector art and exports are not charged. The first 5 finished renders on an account are free. After that a render is paid from your credit balance when it starts, and refunded if it fails. A still up to 1080p is $0.01 at draft quality, $0.03 at good and $0.06 at best; a 4K still is four times that. Video is $0.005, $0.01 or $0.02 per frame at 720p, and 2.25 times that at 1080p.

Give your assistant a workshop

One connector address. Nothing to install.

Connect your assistant

More about the 3D studio

Updated 2026-11-22.